引用本文:
【打印本页】   【下载PDF全文】   View/Add Comment  Download reader   Close
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 756次   下载 690 本文二维码信息
码上扫一扫!
分享到: 微信 更多
桑托斯盆地地层生热率及热结构研究
孙旭东1,2, 郭兴伟1, 郑求根2, 温珍河1, 张训华1, 王锦洲2, 李子渊3
1.青岛海洋地质研究所, 山东 青岛 266071;2.中国地质大学(北京) 海洋学院, 北京 100083;3.中国石油西南油气田分公司, 四川 成都 610000
摘要:
岩石生热率是研究地球内热的一个重要的参数。根据自然伽马与岩石生热率的关系,利用盆地4口钻井的自然伽马测井曲线,计算出桑托斯盆地主要岩石或矿物及地层的生热率。统计了2 964个自然伽马测井数据值,主要岩石或矿物的生热率从大到小依次为:泥岩、砂岩、页岩、玄武岩、石灰岩、硬石膏和盐岩;盆地地层的生热率随深度增加显著降低,生热率体现出受控于岩性变化的特征。以S1井为例,根据岩石生热率和热流的关系,计算出盆地中各个组的生热率,Marambaia组、Itajai-Acu组、Itanhaem组、Ariri组、Guaratiba群、Camboriu组生热率分别是(1.36±0.16)μW/m3、(1.52±0.15)μW/m3、(1.30±0.3)μW/m3、(0.46±0.18)μW/m3、(0.64±0.23)μW/m3、(0.37±0.07)μW/m3,盆地沉积地层产生的热量占表层大地热流的13.62%,因此沉积地层具有一定的产热潜力,对区域有机质的成熟度有一定的影响。建立了岩石圈分层生热模型,其中地壳热流贡献为15.38 mW/m2,占表层大地热流的30.76%,地幔热流贡献值为34.62 mW/m2,地壳和地幔的热流比例为0.44,具有“冷壳热幔”的特征。
关键词:  桑托斯盆地  生热率  自然伽马测井  热结构
DOI:10.11759/hykx20200408001
分类号:P314.2
基金项目:国家重大科技专项项目(2016ZX05033-001-001);国家自然科学基金项目(41776081、91958210);中国地质调查局项目(DD20190429;DD20190365;DD20190377)
Estimation of heat generation in the Santos basin with natural gamma logging data
SUN Xu-dong1,2, GUO Xing-wei1, ZHENG Qiu-gen2, WEN Zhen-he1, ZHANG Xun-hua1, WANG Jin-zhou2, LI Zi-yuan3
1.Qingdao Institute of Marine Geology, Qingdao 266071, China;2.School of Ocean Sciences, China University of Geosciences(Beijing), Beijing 100083, China;3.Petrochina Southwest Oil&Gas field Company, Chengdu 610000, China
Abstract:
Rock heat generation is an important parameter for the study of heat in the Earth. According to the relationship between the natural gamma and heat generation of rocks, the heat generation of the main lithology or minerals and strata in the Santos basin is calculated using the natural gamma logging curves of the four wells in the basin. In this paper, 2 964 natural gamma logging data values are collected. The main heat-generating lithology or minerals are clay, mudstone, sandstone, shale, basalt, limestone, anhydrite, and salt rock. With the increase in depth, the heat generation of the strata in the basin decreases significantly, which is controlled by the change of lithology. Taking S1 as an example, the heat generated by the sedimentary strata in the basin is calculated according to the relationship between the heat generation and heat flow of the rocks. The heat generation of the Marambaia Formation, Itajai-Acu Formation, Itanhaem Formation, Ariri Formation, Guaratiba Group, and Camboriu Formation is 1.36±0.16 μW/m3, 1.52±0.15 μW/m3, 1.30±0.3 μW/m3, 0.46±0.18 μW/m3, 0.64±0.23 μW/m3, and 0.37±0.07 μW/m3, respectively, accounting for 13.62% of the surficial heat flow. Therefore, the sedimentary strata in the study area have a certain heat generation potential, which exhibits an impact on the maturity of the regional organic matter. A layered model of the lithospheric heat generation rate is established, in which the contribution of crust heat flow is 15.38 mW/m2, which accounts for 30.76% of the surface Earth heat flow, and the contribution of mantle heat flow is 34.62 mW/m2. The ratio of crust and mantle heat flow is 0.44, which is characterized by the cold crust and hot mantle.
Key words:  Santos basin  heat generation rate  natural gamma logging  thermal structure
Copyright ©  Editorial Office for Marine Sciences Copyright©2008 All Rights Reserved
Supervised by: Chinese Academy of Sciences (CAS)   Sponsored by: Institute of Oceanology, CAS
Address: 7 Nanhai Road, Qingdao, China.  Postcode: 266071  Tel: 0532-82898755  E-mail: bjb@qdio.ac.cn
Technical support: Beijing E-Tiller Co.,Ltd.