引用本文:

【打印本页】【下载PDF全文】【View/Add Comment】【Download reader】【 Close 】

过刊浏览高级检索

本文已被：浏览 1277次下载 1216次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
高锰铝青铜焊缝在3.5%NaCl溶液中的空蚀行为
闫永贵¹, 马力¹
海洋腐蚀与防护国防科技重点实验室，洛阳船舶材料研究所青岛分部

摘要:

利用磁致伸缩空蚀实验装置对高锰铝青铜焊缝在质量分数为3.5%NaCl水溶液中的空蚀行为进行了研究。结果表明,焊接金属的抗空蚀性能明显高于母材,焊缝金属的空蚀累积失重及失重率均约为母材的1/4。SEM空蚀形貌分析表明,母材的空蚀破坏比焊缝金属严重得多,导致空蚀破坏的裂纹萌生于晶界。

关键词: 高锰铝青铜焊缝钨极氩弧焊(TIG) 空蚀

DOI：

分类号:

基金项目:国防基金重点项目

Cavitation erosion of welding seam of Cu12Mn8Al3Fe2 Ni alloyin NaCl solution

Abstract:

Cavitation erosion of welding seam Cu12Mu8Al3Fe2Ni alloy in 3.5% NaCl solusion was studied by magnet to strictive vibratory device. Results showed that the seam of the alloy was more resistant to the corrosion, and the mass loss was about 1/4 of that in parent metal. SEM observation revealed that the corrosion in parent metal initiated at the phase boundaries between the seam and the base.

Key words: as-welded Cu12Mu8Al3Fe2Ni alloy Tungsten inert gas welding (TIG) cavitation erosion

Copyright © Editorial Office for Marine Sciences Copyright©2008 All Rights Reserved
Supervised by: Chinese Academy of Sciences (CAS) Sponsored by: Institute of Oceanology, CAS
Address: 7 Nanhai Road, Qingdao, China. Postcode: 266071 Tel: 0532-82898755 E-mail: bjb@qdio.ac.cn
Technical support: Beijing E-Tiller Co.,Ltd.