引用本文:
【打印本页】   【下载PDF全文】   View/Add Comment  Download reader   Close
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1567次   下载 2300 本文二维码信息
码上扫一扫!
分享到: 微信 更多
湖泊沉积物氮磷内源负荷模拟
范成新, 张 路, 杨龙元, 黄文钰, 许朋柱
中国科学院南京地理与湖泊研究所
摘要:
在对骆马湖沉积物及其间隙水物化性质、空间分布等分析基础上,在实验室控制的恒温静态条件下,模拟了软性富泥区柱状芯样在不同季节温度下的沉积物-水界面氮、磷交换过程。根据模拟不同温度下的柱状沉积物氮、磷释放速率及其代表时段下的物质释放量汁算,以及应用孔隙水物质扩散模型进行的计算,全湖内源氮、磷负荷分别约为(1113.2±71.3)t/a和(12.50±0.95) t/a,分别占骆马湖年氮、磷入湖量的7.4%和1.2%。沉积物中氮、磷含量差异大及铁含量较高可能是氮释放通量偏高和磷释放通量较小的主要因素。
关键词:  氮磷释放, 模拟, 内源负荷, 骆马湖
DOI:
分类号:
基金项目:国家自然科学基金项目,40171083号;江苏省自然科学重点基金项目,BK99204-2号;国家“九五”攻关项目,96-008-02-02号
SIMULATION OF INTERNAL LOADINGS OF NITROGEN AND PHOSPHORUS IN A LAKE
FAN Cheng-Xin, ZHANG Lu, YANG Long-Yuan, HUANG Wen-Yu, XU Peng-Zhu
Nanjing Institute of Geography and Limnology,The Chinese Academy of Sciences
Abstract:
On the basis of in-situ investigation and analysis of the distribution of sludge and physio-chemical characteristics of surficial sediment in Lake Luomahu during 1998, nutrient exchange patterns between sediment-water interface were simulated with the soft-sediment core samples at different temperatures(due to seasonal changes). The internal source was calculated by mean s of the release fluxes of nitrogen and phosphorus, together with the representative time section for each experimental temperature, an d was compared with the result of concentration diffusion in interstitial water. The result indicates that the internal loadings of N and P in the whole lake are(1113.2±71.3)t/a and(12.50±0.95)t/a, respectively. Large differences between N and P contents and relatively high Fe contents in the soft-sediment are the main factors that cause higher N release an d lower P release.
Key words:  Nitrogen and phosphorus release, Simulation, Sediment internal source, Lake Luomahu
Copyright ©  Editorial Office for Oceanologia et Limnologia Sinica    Copyright©2008 All Rights Reserved
Supervised by: China Association for Science and Technology   Sponsored by: Chinese Society for Oceanology and Limnology, Institute of Oceanology and Limnology, CAS.
Address: 7 Nanhai Road, Qingdao, China.    Postcode: 266071    Tel: 0532-82898753  E-mail: liuxiujuan@qdio.ac.cn  
Technical support: Beijing E-Tiller Co.,Ltd.