引用本文:	郭公玉,张经磊,侯保荣,孙可良,王允珉.合金元素对铝基牺牲阳极性能影响的研究.海洋与湖沼,1995,26(4):397-401.

【打印本页】【HTML】【下载PDF全文】【查看/发表评论】【下载PDF阅读器】【关闭】

过刊浏览高级检索

本文已被：浏览 1345次下载 945次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
合金元素对铝基牺牲阳极性能影响的研究
郭公玉¹, 张经磊¹, 侯保荣¹, 孙可良¹, 王允珉²
1.中国科学院海洋研究所青岛 266071;2.山东省泰安师范专科学校化学系泰安 271000

摘要:

于1988年5月在实验室内，利用正交试验的配比方法研究不同含量的Zn，In，Bi，Ti对Al基牺牲阳极在海水中的性能的影响。通过对牺牲阳极的电流效率、工作电位及腐蚀产物附着情况等项性能的正交计算，得出结论：Zn含量为4.5％，In为0.03％，Bi为0.01％，以及Ti为0％时Al基牺牲阳极的各项性能都呈现为最佳值。

关键词: 合金元素铝基牺牲阳极

DOI：

分类号:

基金项目:中国科学院重点项目，11－12号

附件

EFFECTS OF ALLOY ELEMENTS ON PROPERTY OF Al-BASIC SACRIFICIAL ANODE

Guo Gongyu¹, Zhang Jinglei¹, Hou Baorong¹, Sun Keliang¹, Wang Yunmin²

1.Institute of Oceanology, Academia Sinica, Qingdao 266071;2.Chemistry Dcpartment, Taian Normal College, Shandong Province, Taian 271000

Abstract:

Using the orthogonal method 9 types of Al-basic anodes with different amounts of Zn, In, Bi and Ti were studied in laboratory (in 1988). Anodic closed circuit potential, discharge capacities and current efficiencies were measured in seawater. The test results showed that the closed circuit potentials of the 9 types of anodes were different. The most negative potential was -1.10V (S. E. C.) and the most positive was -0.93V. Their actual discharge capacities were obviously different. Nos. 6, 8 and 9 anodes had higher current efficiencies of about 93.5%. No. 3 anode had the lowest current efficiency of only 64.1%. Calculated results showed that the optimum content of alloy elements is as follows: Zn, 4.5%; In, 0.03%; Bi, 0.01%; Ti, 0%, Al balance.

Key words: Alloy element, Al-basic sacrificial anode